Includes


  • Purrz.75 Wing with linkage for Elevons and cutouts for Servos

  • Servocovers in matching colour
  • Body with cutouts for motor mount and for a FPV camera
  • Aluminum motor mount
  • Sturdy cardboard box for shipping and storage
  • FPV camera mount (fits a 19 mm camera - not included)
  • Bungee kit (all you need is a ground stake)
  • 20 cm of steel servo wire, 1 mm diameter (18 gauge)
  • 2 x APC 5x7,5E Propeller
  • 3d printed Elevon gauge
  • 3d printed RC and FPV electronics carrier
  • 6 flat head screws M4 x 16, black nylon
  • 16 flat head screws M3 x 10, black nylon
  • instruction manual

Required


  • Radio Transmitter RX and TX
  • Motor
  • ESC
  • 2 servos max 11,5 mm thick (we recommend Graupner DES 261 BB or Futaba S3114 or Hacker DITEX EL0106M
  • Wiring for 2 servos (25 cm each)
  • Battery (size max 40 mm x 40 mm x 90 mm)

If you want to fly FPV:

  • FPV headset
  • FPV camera (19 mm camera mount provided)
  • VTX
  • VTX antenna (recommended: Circular antenna max 17 mm diameter

Optional:

  • Flight computer (recommended: Matek F411)
  • GPS unit (recommended Matek M8Q-5883)

Configure your powertrain:

 

Recommended setup for speed:

Motor:         2208 - 2306  (2300 kV)

Battery:       4s LiPo  (900 mAh, min. 80C)

ESC:             45 A

Top speed:  290 km/h (APC 5x7,5E)

 

Recommended setup for long range:

Motor:          1806 - 2205  (2300 kV)

Battery:       2s Li-Ion 18650 (constant current ~ 10 Ampere)

ESC:              20 A

Top speed:  140 - 150 km/h (APC 5x7,5E)

 

Recommended setup for light weight:

Motor:          2204 - 2207  (2300 kV)

Battery:        3s LiPo (800 mAh)

ESC:              25 A

Top speed:  200 - 220 km/h (APC 5x7,5E)